A selection of the best garden tools for trimming bushes and tree crowns: comfortable models with rods, sliding handles and powerful engines.

The best rod loppers

These devices are mounted on a long shaft and are suitable for processing tall garden trees in small areas.

Raco 4218-53/372C

A quality model is intended mainly for trimming shrubs or crowns. The curved sharp blade is made of durable steel and has been hardened. It has a protective coating for a clean and easy cut.

The working diameter of the model is relatively small — 30-32 mm, but still allows you to cut most branches of shrubs and crowns of garden trees. The durable steel body of the device increases the durability of the model. The weight of the tool is just over 800 g.

The adjustable handle is attached to a 3m nylon cord. The rod or telescopic handle is not included with the device. But after buying any of these devices, the lopper will be able to process crowns at the required height without much effort.

Pros:

• Sharp blade with protective coating.
• Ease of use.
• Good build quality.
• Robust tool construction.

Minuses:

• No rod included.

An excellent pruner for working with small branches. The model is equipped with a high-quality sharp blade with a special coating and is easy to use. The only drawback is the need to purchase a barbell.

Center tool 0220

The ratchet pruner is designed for trimming small branches. The sharp blade is made of durable steel and is adapted to work in hard-to-reach areas: the crowns of garden trees and the upper parts of shrubs.

The weight of the tool is about 1 kg. A special rod for this delimber is purchased separately. It will allow you to adjust the working height of the product up to 2.4 meters.

The tension cable of the tool is durable and does not fray for a long time. The model is quite easy to use, so it is suitable not only for experienced gardeners, but also for ordinary summer residents. True, some buyers note the excessive flexibility of the existing saw.

Pros:

• Suitable for cutting branches in hard-to-reach places.
• Ease of use.
• Model versatility.
• Decent build quality.
• Moderate cost.

Minuses:

• The bar must be purchased separately.
• When working, it «walks» a little.

A high-quality tool for use in the garden cuts branches well at different heights, including in places that are rather difficult to access. Good selection at a reasonable price.

FIT 77151

The lopper with a straight blade is made of steel with a protective coating. The hacksaw blade has a length of 33 cm. The tool is equipped with a blade lock that increases the safety of its use. The model is well adapted to work in the garden and can withstand a long service life.

A serious plus of this delimber is the presence of a telescopic rod in the kit, the length of which can be adjusted from 1.2 to 2.5 meters, and the maximum working height reaches 3.5 meters. The cost of the FIT model is at a level comparable to other instruments. The weight is slightly over 2 kg.

Pros:

• An adjustable stem is supplied with the lopper.
• Protective coated blade.
• Moderate cost.

Minuses:

• The construction is somewhat flimsy.

This model comes with an adjustable telescopic pole and is ready to go straight away. The product is well suited for processing garden trees of medium height. The right choice for those who do not want to buy an additional rod and attach it to the lopper.

The best pole cutters

Powerful and very productive tools with different types of motors are the best choice for large areas where many trees and shrubs need to be processed.

Husqvarna 525P5S

The Husqvarna Pole Cutter is powered by a 1.3 liter two-stroke petrol engine. With. The device is mounted on a reinforced rod with a maximum length of 3.5 meters. The cutting part of the product has an adjustable automatic lubrication system.

The model is suitable for processing trees at a height of up to 4.5 meters. The capacity of the fuel tank of the pole cutter is 0.5 liters. It has transparent walls for visual fuel level control.

The maximum diameter of the cut branch reaches approximately 30 cm. The total weight of the tool is 6.4 kg, but a shoulder strap is provided for ease of use. And to make it easier to transport and store, the lopper detaches from the boom, taking up much less space.

Pros:

• Quick launch of the device.
• Excellent performance.
• Long detachable stem.
• Durability and reliability of a design due to high quality of production.
• Convenient to work and store.

Minuses:

• Large tool weight.
• High price.

A high-performance professional-grade tool designed to cut branches of shrubs and trees up to a maximum height of 4.5 meters. It is best used for large areas.

Ryobi RPP750S

The delimber is mounted on a telescopic rod and equipped with an electric motor with a power of 750 W. The maximum length of the rod is 2.7 meters. You can lock the tool in three positions to work with trees of different heights.

The handle of the rod has a special rubber coating for a secure hold. The kit comes with an additional rod that extends the main one. The presence of a shoulder strap also contributes to the convenience of work.

The device’s powerful chain saw handles large branches up to 20 cm thick. It has a 15° tilt for easier work at height. The electric motor allows you to do without the use of gasoline, which makes the model environmentally friendly. The weight of Ryobi is about 4 kg.

Pros:

• Handles thick branches with ease.
• Long telescopic rod.
• Tilt saw blade for easy cutting.
• Low noise level during operation.
• There is a strap for hanging the lopper.
• Does not produce harmful emissions.

Minuses:

The model is very well suited for the care of even large garden trees. If necessary, this lopper can be removed from the stem and used as a conventional chain saw.

Champion PP126

A good model with a gasoline engine with a capacity of about 1 liter. With. mounted on a very long telescopic rod (from 3 to 4.2 m). The blade length reaches 30 cm, the cutting part is equipped with a chain lubrication system. There is also a trigger stopper to prevent accidental activation of the device.

It is quite physically difficult to work with the tool, since the model is very weighty — about 10 kg. But it can cope with branches up to 20 cm thick. And the ergonomically shaped handles effectively dampen vibration from the engine, making it easier to use the tool.

The kit includes, among other things, the accessories necessary for comfortable work: a shoulder strap to reduce the load on the hands, goggles and gloves for safe use.

Pros:

• Very long rod.
• Good performance.
• Suitable for working at high altitude.
• Safety of use.
• Full set.

Minuses:

• Very heavy weight, which not everyone can handle.

A high-quality device with a fairly powerful engine will be a good choice for both summer residents and utility workers. Due to its weight, it is best suited for physically strong people.

Greenworks G40PS20

The lighter (4.5 kg) and more affordable pole saw is powered by a lithium-ion battery. The device is placed on a three-section rod with a maximum extension of up to 205 cm. The length of the working blade reaches 20 cm.

For convenience of work the rubberized covering of handles and an emphasis for a forearm is provided. The model is equipped with a safety lock against accidental start. In addition, there is motor overload protection. Battery life is 40 minutes. The oil tank of the device has a capacity of 50 ml and is connected with an automatic supply system.

Pros:

• Three section bar.
• Ease of use.
• Light weight model.
• Protection against accidental inclusion.
• Very low price for this class.

Minuses:

• In terms of performance, it is inferior to more expensive high cutters.

An eco-friendly tool that does not require fuel, suitable for working with garden trees at medium height. The main advantages of the model are ease of use and low price.

The best telescopic loppers

The simplest type of loppers, equipped with a pole or extendable handles for effective cutting of vegetation.

Gardena 12009

A high-quality, but rather expensive model has telescopic handles from 65 to 90 cm long. The sharp blades of the tool, made of stainless steel, easily and accurately cut branches up to 42 mm thick.

The cutting parts are coated with a special protective coating that prevents sticking of vegetation residues and prolongs the life of the model. The blade lock is not provided in the design of the device.

The lever system of the lopper reduces the required effort. The aluminum handles have anti-slip grips. Plastic shock absorbers facilitate the use of the model and reduce the load on the joints. The weight of the tool is less than 1.5 kg.

Pros:

• High quality workmanship.
• Protective blade cover.
• Ease of use.
• The presence of plastic shock absorbers.
• Telescopic handles with a special coating.

Minuses:

Gardena is a handy gardening tool for trimming shrubs and branches of medium thickness. It has a relatively light weight and special shock absorbers on the handles, which reduce the load on the hands.

Fiskars UPX86 (1023624)

The universal pruner is mounted on a telescopic rod, the length of which can be adjusted from 2.4 to 4 meters. The working diameter of the model is 32 mm — an indicator sufficient for pruning fruit trees. The curved blades are made of durable steel with a protective coating and are suitable for cutting live vegetation.

The angle of inclination of the compact cutting part is also adjustable, which increases the usability of the lopper. Near it there is an orange pointer that helps you navigate while working in dense, heavily branched areas. The bar is equipped with a locking mechanism, and the aluminum handles are equipped with a rubberized anti-slip coating. The weight of the tool is almost 2 kg.

Pros:

• Sophisticated device design.
• Handles with anti-slip coating.
• Long telescopic rod.
• Ease of use.
• Good quality.

Minuses:

• The price is high for this category of tools.

The universal model with an adjustable bar is used for trimming branches at different heights. It withstands intensive use, suitable not only for private use, but also for professionals, as well as public utilities.

Verto 15G259

Another simple lopper with retractable telescopic handles. The handles located at their ends allow you to securely hold the tool in your hands. The handles are made of durable aluminum, and their maximum length can reach almost one meter. This is sufficient for processing shrubs and lower branches of small trees.

The sharp blades and robust design of the tool allow you to cut branches up to 45 mm thick the first time. The lopper handles both dry wood and fresh wood. The weight of the model is about 1.5 kg, which is relatively small, given the sufficient length of the handles.

Pros:

• Long telescopic handles.
• Can cut thick branches.
• Ease of use.
• Quality materials and assembly.
• Durability.

Minuses:

• There are better tools available for sale.

A simple tool for summer cottages and gardens allows you to cut fairly thick branches. The model has long retractable handles and easily withstands intensive use for several seasons.

Center tool 0207

Standard type tool with two telescopic handles. Curved steel blades easily cut dry and fresh branches up to 45 mm thick. The ratchet mechanism allows you to cut wood in several stages, reduces the required effort, increasing the convenience and efficiency of work. However, when pruning thick branches, a physically unprepared person may experience difficulties due to the weight of the model (1.6 kg).

The maximum length of the fully extended handles of the tool reaches 75 cm. Slippage can result in serious injury due to the position of the tool during operation.

Pros:

• Handles thick branches.
• Special coated handles.
• Good workmanship.
• Durability and reliability.
• Comfortable.

Minuses:

• Pretty heavy construction.

Affordable model for easy cutting of the lower branches of garden trees, shrubs or hedges. It can be used with a ladder, but in this case, prolonged work will require considerable endurance and strength.

Which pruner is better to buy

A lopper is a useful tool for trimming shrubs and cutting branches at great heights without a ladder. There are several main varieties of loppers:

• Telescopic

The simplest type of loppers. Most often, such models have two working blades with a swivel joint and telescopic handles, adjustable in length (up to 80-90 cm). Sometimes there are models on longer special rods. The final choice depends on the height at which you have to work.

The working part of these tools is a saw, not two blades. The cutting segment is driven by a handle connected to it. The main thing to pay attention to when buying is whether a rod is included in the kit, since some models are sold without it.

The most productive type of tools designed for processing large summer cottages, parks and gardens. These devices are equipped with different drives (gasoline, electric) and have much more weight than other types of models.

When choosing loppers, you need to pay attention to the working diameter — the maximum diameter of the branches that a particular model can cut. Depending on the type of lopper and blades installed, some tools can cut branches up to 50-60mm.

The protective coating of the blades extends the life of the tools. It protects materials from corrosion, which is especially important when cutting live, sap-producing plants.

It is advisable to select models of light weight that will not cause great difficulties during long work. Also, a significant plus, which significantly increases the safety of using a delimber, will be the presence of a blade lock.